Ultra bright 70W dimmable LED COB panel strip Light source module 12V DC COB LED lights for diy night light solar lamp

Product pictureWireless RF ControllerCaution:packege without Battery!!!(Battery is not include)Please add CR2025 OR CR2032 Battery .Instructions1.  Dimmer & Dynamic2.  8 Dynamic Effects3.  10-level Dimmer 4.  256-Grade PWM5.  Speed Adjustable6.  Card Type Remote7.  Ultra Slim Design8.  Smooth Dimmer Effect 9.  1 to 1 Remote Paired10.  Auto Save Function 1.Turn On/StandbyPress this key to turn on unit or switch to standby mode.Unit will turn on and restore to previous status at powering on moment.2.Lighting ModeSwitch to lighting mode from dynamic mode.3/8/9. Dimmer Adjust ShortcutsSwitch to 100%,50%,or 25% brightness lighting mode.4/6.  Dynamic Mode AdjustSwitch to dynamic mode from lighting mode,or switch between different dynamic modes.5/7. Speed AdjustAdjust playing speed of dynamic modes.Press SPEED to increase speed and press SPEED- to decrease.10/11. Brightness Adjust (Dimmer)Adjust lighting mode brightness.Press BRIGHT to increase brightness and press BRIGHT- to decrease.FunctionsInstalling1.Power SupplyThis unit accepts DC 12V to 14V power supply.The red cable should be connected to positive and black cable to negative.Please select proper power supply according to the LED application.2.LED OutputThe red cable should be connected to LED positive and black cable to negative.The peak output current is 6A,please reduce load if main unit is overheating.CAUTION!Do not short circuit the LED output,this may lead to permanent damage!3.Remote ControllPlease pull out the insulate part before using.The RF wireless remote signal can pass through barrier,so it’s not necessary to aim at the main unit when operate.For proper receiving remote signal,do not install the main unit in closed metal parts.The remote battery is 3V CR2025 type,please only replace with same type battery.Specification